|
|
| Aliva® 263i Shotcreting Machine |
 |
|
|
Configuration
Simple but multi functional
|
Description
The Aliva 263i is a very sturdily constructed two-axle shotcreting machine for the processing of wet or dry mixes |
Working Principle
The Working of the shotcreting machines is based on the rotor principle.The concrete mix is transported by thin stream method (compressed air stream) to the spraying nozzle. |
Gasket Plate Lubrication
Automatic lubrication of sealing plates reduce wear and abrasion and thus maintenance costs. |
Original Accessories
A large number of well matched accessories allow maximum machine output with high-quality results. |
Theoretical Performances
Rotor Volume: 10 / 16 / 25 litres
Output: 10-15m3/h |
|
|
|
Operation
Precise and variable
|
| Pulsation Free Thanks to pulsation free conveyance the thin- stream process is also suitable for manual spraying. |
Liquid Dosing UnitThe dosage unit is coupled to the shotcreting machine. The selected accelerator dose is automatically adapted in function of the output of the shotcreting machine. |
Concrete Mix AS DesiredShotcreting machine Aliva 263i is suitable for spraying wet and dry mixes. Case by case you can choose the optimal process. Switching over from dry mix spraying to wet mix spraying can be done without any modification of the machine and without any additional machine components. No need for a pumpable mix with the wet spraying thin stream method. Minimum slump:8 cm |
Simple MaintenanceCleaning of the machines is extremely simple and quick. Hopper and feeder drum swing open thanks to a rotating mechanism. |
|
|
|
| Product Description This Aliva 263i is a very sturdily constructed two-axle shotcreting machine for the processing of wet or dry mix. |
UsesThe machine is suitable either for manual spraying or by means of a robotic arm. The Aliva 263i is developed for the application of shotcrete in tunnels, mines and slopes. The machine has been designed especially for steel fibre spraying. |
| |
|
|
|
Product Data
Techinical Data
Dimensions
Length L 2035 mm
Width 1100 mm
Height H
With rotor 10 + 16 L 1290 mm
With rotor 25 L 1390 mm
With hose rotor 16 L 1390 mm
Weight
BASIC/EXTENDED approx. 1450 kg
Content of hopper 100 litres
Drive
Motor output 5/7,5 kw
Speed range 1000/1500 rpm
Voltages 400 V 50 Hz
Protection IP 55
|
|
Aliva® 403 Liquid Dosing Unit
|
|
Product Description
|
The appropriately sized dosing unit Aliva 403 for Liquid accelerators enables an infinite setting of accelerator. |
UsesThe Unit is equipped with a simple control which is done entirely on the dosing unit itself, i.e. the amount off additive is set manually by means of the dosing knob. |
Drive
Motor Output 0.75 KW
Voltage 400 V 50 HZ |
| Theoretical Conveying
Conveying output 24-240 I/h
Output Pressure max. 7 bar
|
|
Aliva® 302 Telescope Spraying Arm (Robo Arm)
|
|
| Uses
Thanks to its simple and rigid construction, the Aliva 302 is very suitable for mounting onto different types of carriers.
|
Hydraulic System
Motor Output 5.5 KW
Voltages 400 V 50/Hz
Protection IP 43
Oil Pressure 180 bar |
|
Aliva® 407 Shotcreting System with Local Made Carrier
|
|
1. Carrier TATA
2. Telescopic Spraying Arm AL-302
3. Hydraulic Unit For AL-302
4. Shotcreting Machine AL-263i
5. Lifting Platform For AL-263i
6. Accelerator Tank
7. Liquid Dosing Unit AL-403
8. Cable Reel(50 m Cable manual) |
|
|
|
|
Mobility
The Aliva 263i along with the Aliva 302 Telescopic Spraying(Robot) Arm and Liquid Dosing Unit can be mounted on a local truck chassis (e.g Tata SK 1613 or Leyland 1613s) to form an integrated shotcreting unit. |
|
Theoretical Conveying Output (Wet & Dry)
Rotor
L |
House
mm |
Conveying output*m3/h |
Max.
grain
mm |
Max.Conveying
Distance m
Horizontal/vertical |
| |
|
Speed 1 |
Speed 2 |
|
Dry: 300/100
Wet: 40/30 |
| 10 |
50 + 60 |
4 |
6 |
16 + 20 |
| 16 |
50** + 60 |
6 |
9.5 |
16 + 20 |
| 25 |
60** + 65 |
10 |
15 |
20 |
| * With theoretical filling degree of 100 %. |
** Only when dry spraying, with speed 1, for conveying distance of max. 60m.
|
|
MEKASTER
